Bill,
FWIW, I have had no issues with PS noise or stability no matter how I distribute my modules across the two supplies in my system. Actually there are 3 supplies - two PowerOnes supplying 1.5A each at +/-15V, and a separate PowerOne supplying just +5V.
Paul has overengineered these modules and they are quite well filtered for supressing noise.
Just lay out your distribution system cleanly, use thick enough wire, make sure your connections are solid, and make sure your system power draw is specified at 2/3 to 3/4 of your power supply capacity. This will provide a safety factor for system startup time, when extra juice is required.
Moe
On 2/20/07, William J Hall <wjhall@...> wrote:Dave - thanks so much for your support. Will and I have been admirers
of the Synth of Doom <g>.
We've already purchased two MOTM power supplies from Paul - a 900 and a
950. Looking at your page, it looks to us like the following
distribution should be possible... grouping all the VCOs together... right?
Thanks again.
Bill and Will
Bill and Will's Power distribution V1