What you describe is normal. The signal from A and B IN through the
mixer with the input switch on NORMAL is ∗one third of the input level∗,
by design. The level of the outputs from the Tellun daughterboard are
fixed and independent of the input levels.
Richard Brewster
http://www.pugix.comJonathan Snipes wrote:
> Hey, just a quick question ... my 120 seems to have a very low output
> compared to the rest of my synth ... my oscillators are from dotcom,
> and the difference in volume between a raw waveform out of the
> oscillator & the output of the 120 (with all the suboctaves turned
> all the way off, and the A IN knob turned all the way up) is
> significant ... I also installed the Tellun daughterboard, and the
> individual suboctave outputs seem to be of normal volume.
>
> Just curious if this is true for others, or if I assembled mine
> poorly (entirely possible)
>
> -Jonathan
>
>
>
> Yahoo! Groups Links
>
>
>
>
>