> I'm not as coordinated as David. I use the "2 at a time" technique. Hold 2
> bottom bolts in while flipping board over, drop on spacers, bracket and
> secure 2 nuts loosely. The last two spacers are installed one at a time
> holding them in place with hemostats or needlenose pliers while pushing
the
> bolt through.
this is why i suggested paul switch to the threaded spacers. i'm
semi-coordinated,
but i manage to drop one and spend 20 minutes looking for it. the threaded
spacers
would aslo provide a "stand" for the board when/if you need to troubleshoot
it.
just a suggestion, it not like i asked him to make the panels red or
something.
blue filters, white oscs, green eg's, and purple horseshoes.
ok, back to reality
-steve