A better read for the more 'advanced' synthesists (Which I asume most MOTM users are,
afterall it is not often that an absolute beginner stubles across an MOTM system as the
first synth.....) is the following: http://www.cim.mcgill.ca/~clark/nordmodularbook/
nm_book_toc.html
Eventhough it is based on the Clavia Nord Modular, the principles and theory in this book
go much deeper and broader than the above cookbook.
Koos
--- In motm@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> ><http://www.synthesizer-cookbook.com/id5.html>http://www.synthesizer-
cookbook.com/id5.html
> >
> >has anybody checked this out yet? comments? worth buying?
>
> This cookbook is very much oriented towards the beginning synthesist.
> The patches are all very simple and use a standard template: 2 VCO, 1
> LFO, 1 LPF (either 4 pole or 2 pole), 1 VCA, and 2 EGs (for LFP and
> VCA). You don't need a modular synth to recreate any of these
> patches, you can do them all on a Pro-One or MS-20. Using a standard
> template to work with any synth would normally be quite problematic,
> but the author has thoughtfully included a calibration section (and
> included an audio CD) so you can figure out which knob setting
> responds to 1.4 kHz on your filter (for example). Someone with a
> modest modular synth would likely go much beyond the simplicity of
> these patches.
>
> So is it worth buying? Depends on who you are.
>
> Collector of all things synth: yes.
> Beginning synthesist: yes.
> Intermediate synthesist: maybe.
> Advanced synthesist: no.
>