Thank you, Tom. These are interesting, even if I don't know what a
Roland JD-800 or a Korg EMX are. I am a little confused about the
patch. You write, typically:
Audio: JD-800 -> MOTM-120 -> MOTM-510 -> MOTM-410
CV: MOTM-510 (full out) -> MOTM-410 (rate)
I know it is hard to describe a patch in words.
Does this mean that you are using the MOTM-510 Audio Out as the input to
the MOTM-410, and Full Out of the same MOTM-510 as a control input to
the MOTM-410? If that's the case, I don't understand it, because the
MOTM-410 rate input controls the rate of the internal LFO's. I'm not
sure what it means to control an LFO rate with an audio frequency
signal. Perhaps the modulating signal feeds through somehow. I'll have
to try it. (See, this is my theoretical mind, the mind that normally
does not think to modulate an LFO rate with a high frequency control.
In the case you modulate the MOTM-410 DEPTH with the 510 output, since
that is a VCA the control signal would mix through. But you only used
that with the TBE-Sound04.
Does it make much difference to the sound if you disconnect the MOTM-510
Full Out from the 410 CV inputs?
-Richard Brewster
http://www.pugix.comTom Adam wrote:
> Oeps....
>
> http://users.pandora.be/the-big-ear/temp/TBE-samples.pdf
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>