> It is not working for me. The program is able to connect. The 650 display
> says 'Connected Await RX'. I select the file and tell it to update . The
> update software says it is updating the firmware. There is a progress bar
> and then it says 'MIDI timeout'. The 650 has to be power-cycled to work
> again. There is a Global Option called Patch RX that is Disabled by default.
> I tried enabling this, but it made no difference.
Firmware transfer requires ∗NO∗ settings in the menu.
The OUT on one bus on your computer needs to be connected to the IN on the
MOTM-650. Sounds like it is since it's saying "Connected Await RX" (that
means it's in firmware transfer mode).
The IN of one of your MIDI buses on your computer needs to be connected to
the out on the MOTM-650.
If the IN and OUT ports in the SFUU aren't set correctly, you'll also get
this problem.
Double check your connections, and let me know.
-->Neil
----------------------------------------------------------------------------
C. Neil Bradley KE7IXP Beaverton, Oregon