It is not working for me. The program is able to connect. The 650
display says 'Connected Await RX'. I select the file and tell it to
update . The update software says it is updating the firmware. There
is a progress bar and then it says 'MIDI timeout'. The 650 has to be
power-cycled to work again. There is a Global Option called Patch RX
that is Disabled by default. I tried enabling this, but it made no
difference.
Richard Brewster
Neil Bradley wrote:
>> There are no "formal" instructions yet. Basically, the steps are:
>>
>
> Slight corrections:
>
>
>> a) get the .SIT file and unpack Updater.zip from
>>
>
> .sfi (not .SIT)
>
>
>> b) when you run the program, it should automatically detect all MIDI ports on
>> your PC. There are drop-down selections if you have more than 1.
>>
>
> You need to select both an input and an output port.
>
>
>> c) attach MIDI cable, turn on the '650
>>
>
> Attach two MIDI cables - one in, one out.
>
>
>> d) select the .SIT file
>>
>
> .sfi file
>
>
>> e) download
>>
>
> Click "Update".
>
> -->Neil
>
> ----------------------------------------------------------------------------
> C. Neil Bradley KE7IXP Beaverton, Oregon
>
>
>