I used these on a Noise Ring conversion and they are great! I wish John had come up with these 4 years ago!
Moe
On 9/2/06, John Loffink <jloffink@...> wrote: While everyone is waiting for their MOTM kits to arrive, here's a bit of
shameless self promotion.
Pot Chiclets are an aid for assembly of MOTM kits, DIY kits and module
conversions using Spectrol or Bourns pots. Instead of painstaking J lead
preparation, pots are mounted to the Pot Chiclet mini PC board, and the
wires are soldered to the provided PC board holes. These are useful for
almost any MOTM 2U wide panel that uses Spectrol pots as the second row of
pots do not mount to the main module PCB. Pot Chiclets allow you to mount
the pot to a (mini)-PCB as was intended, then solder wires between pads on
the main board and pads on the Pot Chiclet.
http://www.wavemakers-synth.com/motm/chiclets.html
These are available for shipping. I also have a limited number of old style
Pot Chiclets (6 holes/pads), available at a discount, that will work fine
with MOTM kits - inquire.
John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com