The problem I found was that with a sinus signal in both x and y
inputs, I do not hear any warping of the y signal, regardless of the
knob positions, also unplugging the x input makes no difference
with only a sinus signal to the x input I did some measuring :
On R1 ( resistor between pot and TL072 ) I can read a voltage, but on
the resistor R5 ( resistor after TL072 )I do not find any voltage.
Would that indicate that there is a problem with the TL072 ?
Steven
--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> 'X' is mainly a CV input, not audio (Y is the main audio input for
warping).
>
> Paul S.
>
> ----- Original Message -----
> From: "stiebz" <theevaporizer@...>
> To: <motm@yahoogroups.com>
> Sent: Sunday, August 06, 2006 8:32 AM
> Subject: [motm] wavewarper problem
>
>
> > there seems to be problem with my wavewarper,
> >
> > if I give an input to the audio x input, I get no output
whatsoever
> > independend of the knobsettings
> >
> > the Y & Z seems to work OK, individually but also while 'warping'
> >
> > I can read a voltage on the potmeter of X IN and the jack seems
to
> > wired correctly, but other than that I have no clue what could be
the
> > problem, anybody any idea ?
> >
> > many thanks in advance !
> > steven
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>