There is no problem with thickness. Yes, it provides 26U plus a little
gap that is handled with Stooge end caps. I believe all the rails and
screws are -- or will be -- available from Stooge Industries.
http://www.stoogeindustries.com/Richard Brewster
http://www.pugix.comedibennardo wrote:
>I see, but if rails must be added and not replaced, i guess rails
>have their own thickness so the modules would probably protrude a
>bit outward of the case if I'm not mistaking, unless there's a deep
>gap in those cabinets between the edge of the cabinet and the
>internal surface where the modules are attached. I can not tell
>anything from the pics.
>What about the number of U spaces? i calculated that a 22 .com is
>equivalent to 26 motm U plus some gap, is this correct? I'm not
>familiar at all with inches in this metric latin world :-)
>
>Enrico (Italy)
>
>
>
>
>