Woah, that would be cool, I'll look into it.
Lumex does make a bi-coloured LED in the same MOTM package, but last
time I looked you had to buy 300 at once (from Mouser). I bought a
dozen from Paul S instead. Maybe this could be another future Stooge
product.
>You know what might be cool: a bi-colored LED that would glow red upon
>receiving the initial gate and then switch to green when the delayed
>gate fires.
>
>Is that "too much"? I don't think Lumex makes a bi-colored LED in the
>type of packaging that we use, either. At least they didn't at one
>point.
>
>
>-----Original Message-----
>From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
>Scott Juskiw
>Sent: Monday, January 09, 2006 12:07 PM
>To: motm@yahoogroups.com
>Subject: [motm] Re: A good weekend for MOTM
>
>>Another candidate for a utility module (not sure if it can be built
>>with MUUBs though - dual one shots/gate delays.
>
>I had planned to build a digital gate delay (the TLN-774), but that's
>been on the back burner for two years now, I may never get it done.
>So maybe a simple MUUB gate delay would be useful in the meantime.
>There is space on the MUUB boards for adding a 7555 timer chip. I'd
>like to fit two gate delays into 1U of space, so it would have to be
>very simple, just a delay of the rising edge of the gate, not the
>falling edge.
>
>1. delay time pot and jack
>2. input gate jack
>3. output delay jack
>4. LED
>
>What other features would we need? Maybe a hold time on the delayed
>gate, if that's not too complicated for a MUUB.
>
>