> > So this morning I decided put together a manifest of what I wanted in
> > my SKB pop-up mixer case.
> >
> > upper: 300 101 310 440 420 890
> >
> > lower: 820 380 800 800 650 950
moe wrote:
> I'd recommend a couple of changes to your proposed system. First, I'd
> choose the MOTM-390 in place of the 380. Especially with only two
> VCOs, two lfos with square, one with voltage control, stacks up to be
> more versatile than 4 manual sine/triangle lfos IMO.
>
> Also, don't give up those 3U to the power supply. It can be remotely
> mounted to give you space for more modules.
Thanks. I went for the 390 as you suggested. We'll have to see where I
can mount the 950 guts.
sduck409 wrote:
> I think you forgot about adding a 190 - sure, it's not the sexiest
> module out there, but they're pretty indispensable in most patches.
> I'd lose the 950 and put in a 190 there, at least so your 800's have
> something to do in the more trad patches.
Thanks. Yeah, the system I was experimenting with didn't have any 190s,
finished and mounted, so I didn't think to add one. I think I just had
the filter cutoff frequency controlled by an envelope such that it
basically stopped the sound at the end of the release. Paul S. pointed
this out to me when I ordered.