Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: Re: calibratng 420 question

From: kvltleader <skm-etr@...>
Date: 2005-09-03

dont worry about this, Paul answered me within minutes.
 
'Typo :(
 
Set the FREQ to 220Hz, probably around '4' or so. You want to set 1V/Oct in the 100/200/400Hz range.
After that, it doesn't track so great.
 
Paul S.'
 
in case anyone else was interested....
 
thanks
 
 
----- Original Message -----
From: kvltleader
To: motm@yahoogroups.com
Sent: Saturday, September 03, 2005 11:10 AM
Subject: calibratng 420 question

(i just emailed this to Paul, but thought I would post it as well incase I can get some quicker help as I am trying to do these now)
 
I am calibrating the 1v/oct trim in my 2 420's
 
the instructions say to
 
set mode switch to lp
set freq to 6
set res to 9
 
now at a440, my pitch from the 420's is approx 9khz, am i doing something wrong.. mind you the freq counter im using is on my cpu (but it seems close enough for other things ive been calibrating)... i semm to be closer to the a440 mark with my freq control at 3.
 
chris