Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [motm] Swapping Power Supplies

From: Robert van der Kamp <robnet@...>
Date: 2005-08-26

On Friday 26 August 2005 15:16, Paul Schreiber wrote:
> No, but for best results mount them next to each other
> (not on opposite ends of the cabinet). You will need 1
> large gauge (say #10) ground wire to connect the output
> grounds together.

Okay, but what to do when you have two cabinets, each with
their own '9xx PSU to feed the modules in the cabinet? Do
they need the above treatment too?

- Robert (hoping to build cabinet #2 soon)