I have a couple more, but I'm also working on a peice that is mostly
485. Stay tuned, probably finished this weekend...
Mike
--- In motm@yahoogroups.com, Robert van der Kamp <robnet@w...> wrote:
> On Sunday 07 August 2005 19:33, Mike Marsh wrote:
> > Hi All -
> >
> > Just finished my 485. The demos show the 485 fed by two
> > 310's, one all SAW one all SQR. I attenuated the VCO outs
> > a little using the Oakley MultiMix. These go into the
> > 485, as does an 800 into the FM IN. The out goes to a
> > 420, which is modified by an LFO into FM1. Both samples
> > show the 485 alone, then about half way through the 420
> > kicks in.
>
> Nice and gritty!
>
> This shows how different the '485 HP and LP modes are
> indeed. LP is much cleaner.
>
> Did you do any other demos Mike? ;)
>
> - Robert