--- In
motm@yahoogroups.com, Jason Proctor <jason@r...> wrote:
> despite doing it easily on my voyager and pro one etc, i've never
> managed to figure out the deal with oscillator sync on MOTM. can
> someone post a simple osc sync sweep patch so i get it? thanks.
Make a standard 2 VCO voice patch - VCOs -> VCF -> VCA, your kbd
controls both VCO pitches, and gates two EGs. EG1 patched to VCA
control, EG2 patched to VCO2 FM in. Exp or Lin, doesn't really matter
although Exp will probably give you a wider sweep.
Patch another output of VCO1 to the sync input of VCO2. It's best if
you use pulse or saw out of VCO1 for this. Set sync switch on VCO2 to
HARD.
The tuning of VCO1 will control the perceived pitch of the sound. The
tuning of VCO2 will control the sync "growl". VCO2 will be tuned a
couple of octaves higher. Grab the COARSE knob for VCO2 and sweep it
and you should hear the characteristic hard sync sound.
To automate that, turn up the FM input to feed some envelope sweep to
the pitch of VCO2.
That's all there is to it!
Moe