PRTOTYPE stuff copied below:
Got the prototype up and running. Picture of the prototype pc board running
here:
www.synthtech.com/pix/m730_pcb.jpg
Here is a logic analyzer showing some of the outputs being divided from 2 to 8:
www.synthtech.com/pix/m730_out.jpg
The VC-Div also has an 8-step CV output that increments in 4ths/5ths/octaves for
pseudo-melodic sequences or use it for a "sawtooth" output (at 1/8th the input).
The CV Divide output is independent from the bank of 'fixed' dividers, and can
vary from 2 to 33. There is also 2 more operating modes: a "half-divide" from 1
to 16.5 and a Pulse Output mode, that the dividers switch from a square output
to a fixed 3ms positive-going pulse output. This is useful for triggering EGs
and syncing LFOs.
David Brown's Page (Beta tester)
http://modularsynthesis.com/modules/motm/730/MOTM-730.htmRobert Rich Demo:
11 real-time MOTM modular voices (with some digital delay) all driven by the
MOTM-730 VC Pulse divider prototype. No MIDI, no sequencers, just a LFO for the
'master tempo'. The '730 is used to trigger the EGs and has a stepped CV out
driving filter cutoffs across 4 of the voices.
www.synthtech.com/demo/rr_motm730_1.mp3
Paul S.