Errr..no.
The VCO core is a sawtooth that actually resets to +5V. The output waveforms are
a result of level shifting.
Paul S.
----- Original Message -----
From: Paul Wagorn
To: 'Richard Brewster' ; motm@yahoogroups.com
Sent: Monday, April 11, 2005 9:13 PM
Subject: RE: [motm] possible solution to (part of) clicking bass?
Yep, and yep. I sort of assumed these to be the case . paul?
From: Richard Brewster [mailto:pugix@...]
Sent: Monday, April 11, 2005 7:09 PM
To: Paul Wagorn
Cc: motm@yahoogroups.com
Subject: Re: [motm] possible solution to (part of) clicking bass?
Success with this would depend on whether the sync resets the waveform
to zero volts. Another assumption is that the sync occurs on the rising
edge of the gate.
--Richard Brewster
Paul Wagorn wrote:
>So, not to bring up a nasty thread, but as far as I'm concerned there are 2
>things at work with the clicking issue (for me anyways), but I'm going to
>focus on 1 of them right now/
>
>Some people are having problems with clicking due to chopped waveforms. One
>of the suggested solutions is to increase attack time. Of course this might
>cause the sound to be less 'punchy' depending on how much you hve to
>increase the attack. Here's an idea (untested because I don't have my 110
>right now)..:
>
>Mult your trigger or gate signal to the sync in of the oscillator. In
>effect (if I'm right), this will cause the waveform to start the the zero
>point for each note (like some digital synths), which should completely do
>away with clicking caused from chopped waveforms.
>
>Thoughts?
>
>paul
>
>
>
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/motm/
To unsubscribe from this group, send an email to:
motm-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.