My 190 doesn't click, at least not anymore than my SH-2 does. or any
other synth I own. I'm running through a Soundcraft Spirit board into
Mackie monitors. It's certainly not anything that's making bass
sounds difficult, if I'm using really low freq I just move the attack
up just slightly on the 800 and the click ceases completely and I get
really snappy smooth bass.
- Michael nil-x
- Pressure : Penetration
--- In motm@yahoogroups.com, "Paul Wagorn" <pwagorn@p...> wrote:
> It's not the 800 envelope generator, it's the VCA. We've been
through this
> many times. (now ∗I∗ am gritting my teeth)
>
>
>
> I have a ton of other vca's that do not exhibit the same behaviour
(Doepfer,
> moog, etc). of course they will 'click' at superfast attacks & low
freq
> waveforms, but nothing like the MOTM vca.
>
>
>
> If you remember Paul, the problem was never solved. $10,000 scope
or not.
>
> "The ∗same file∗ makes ∗no clicks∗ on my Event 20/20s." buloney.
Play the
> file I sent you a year ago.
>
>
>
> paul
>
>
>
>
>
> _____
>
> From: Paul Schreiber [mailto:synth1@a...]
> Sent: Thursday, April 07, 2005 5:19 PM
> To: motm@yahoogroups.com; Jim Carlile
> Subject: Re: [motm] Re: Clicking VCA
>
>
>
> (grits teeth):
>
> a) there is NOTHING WRONG with the '190 VCA.
>
> b) I've sold over 180 '190s, perhaps 4 people have said something.
>
> c) I've looked at the outputs with my $10,000 digital scope looking
for
> obvious
> 'spikes' or DC shifts. Nope. I've run FFTs. I've
duplicated "clicking" by
> hand-editing waveforms in SoundForge and playing them back on
crappy PC
> speakers. The ∗same file∗ makes ∗no clicks∗ on my Event 20/20s.
>
> d) What you may want to try is increasing C9 on the '800 to like
10uf
> non-polar.
> This will increase the overall ADR times, and you may find that on
the lower
> end
> of the scale (from 0 to 2) it's easier to find an Attack time that
is more
> 'forgiving'.
>
> e) you may find that Sines and Triangle will 'click less' than
pulses or
> saws.
>
> Paul S.
>
>
>
>
> _____
>
> Yahoo! Groups Links
>
> ∗To visit your group on the web, go to:
> http://groups.yahoo.com/group/motm/
>
> ∗To unsubscribe from this group, send an email to:
> motm-unsubscribe@yahoogroups.com
> <mailto:motm-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> ∗Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/> Terms of Service.