Actually, I made a typo:
The guide says that one should be 1000pf marked E102, and the other,
0.01 mfd stamped D103.
-----Original Message-----
From: The Old Crow
To: '
motm@onelist.com'
Sent: 11/8/99 11:26 AM
Subject: Re: [motm] HELP! MOTM-800 Box Caps
From: The Old Crow <
oldcrow@...>
On Mon, 8 Nov 1999, Tkacs, Ken wrote:
> I'm home from work building my modules today. I'm halfway through the
800 EG
> and I'm stuck on the "yellow box caps." The manual says they should be
> marked "102" & "104" but mine are "1n0 J 63∗" and "10n J 63∗"
I'm not Paul, but here is how these codes work:
102 = 10 x 10^2 x 10^-12 = 1000 picofarads = 0.001 microfarads
104 = 10 x 10^4 x 10^-12 = 100,000 picofarads = 0.1 microfarads
1n0 = 1.0 "nanofarads" = 1 x 10^-9, = 1000 x 10^-12 = 0.001
microfarads
10n = 10 nanofarads = 10 x 10^-9 = 0.01 microfarads
100n = 100 nanofarads = 100 x 10^-9 = 0.1 microfarads
Are you sure the one cap isn't a 100n ?
--Scott
/∗∗/