Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: Re: The dot com QCS44 Tilted Walnut Studio Cabinet - space question

From: "synthbaron" <synthbaron@...>
Date: 2005-03-30

--- In motm@yahoogroups.com, "J. Larry Hendry" <jlarryh@i...> wrote:

> The 490 mounts on a Stooge products 3 pot short bracket. Many MOTM
products
> have a bracket that is just as deep, but is 1.625 inches taller.

I figure I could squeeze another 2 1/4" (a slightly innacurate and
conservative measurement) in the downward direction. So MOTM should
fit just fine.

> To determine if the 3 pot long bracket will fit, extend an
> imaginary line straight back from the bottom of the bracket 2.75"
and see if
> that hits the bottom of the dot com cabinet.

Oh, no, there's plenty of room for that bracket. Your 4 pot "long" one
looks like it would would fit too.

:-)