Archive of the former Yahoo!Groups mailing list: MOTM

I Wish!

----- Original Message -----
From: "Paul Schreiber" <synth1@...>
To: "MOTM litserv" <motm@yahoogroups.com>
Sent: Friday, March 04, 2005 12:27 AM
Subject: [motm] Need 2 beta testers


>
> I need 2 beta testers for the VC Pulse Divider prototype. Here are the
> ∗requirements∗ :
>
> a) have a MOTM-950 supply or have one on order (which means I'll bill you and
> send it with the proto). OR...place an order for one :)
>
> b) the prototype is ∗not∗ a 'module'. It is a pcb about 8 x 10 inches. It needs
> to lie flat on a surface (not dangling in space) within 24in of the MOTM-950.
> The jacks are pcb mounted along the 'edges' of the board. There are some
> switches and pots also soldered on the board.
>
> c) Although you can run audio through it (up to about 14Khz) that's not the
> ∗primary∗ use. It's a "clocking" module that sits in-between say a LFO and a
> sequencer. The input can be any thru-zero wave, but the outputs of the divider
> are (currently) 50% duty cycle square waves of about 0 to +4V. I need testers
> that have 'things' with external clock inputs.
>
> d) there is a 'stepped' CV output that is set for 4ths/octaves/5ths that you can
> drive VCOs, VCFs, etc with. Fixed at 8 steps, but driven by either the input
> clock or the /N clock (switch selected).
>
> e) you HAVE to mess with it for some decent time by April 1st. And I don't mean
> "Oh Sh-t, Paul is going to call me tomorrow! I'd better ∗find∗ it!".
>
>
> So, if you qualify please send me a ∗PRIVATE∗ email.
>
> Paul S.
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.6.0 - Release Date: 3/2/2005
>
>


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.0 - Release Date: 3/2/2005