--- Tobias Machine Head <
tobias@...>
wrote:
> Here's a quantizer in MOTM format. Although it has
> white a metalic/white
> panel. It's also a 1/4 inch banana combo.
>
> http://www.analogic-acs.com/quantizer.html
>
> Cheers!
> Tobias Enhus
>
>
>
> >
> > For quantizing applications the wavetable output
> is used as a control
> > voltage. In this mode the Miniwave is set to the
> 0-10V scale, which
> > takes positive input voltages and puts out
> positive voltages. A
> > quantizer PROM has a table that translates the
> incoming voltage to the
> > nearest quantized value, assuming a 1V/octave
> control voltage. The
> > standard Blacet PROM has 16 quantized scales, and
> the Quantizer PROM
> > offers 256.
>
http://stretta.com/~matthew/resources/waveproms/index.html > > (Too bad these are not currently available.)
> >
> > -Richard Brewster
> >
> >
> > Jeff Laity wrote:
> >
> >> When you do this, are you using the PCM sample
> wave playback as an
> >> audio source or as a control voltage?
> >>
> >> On Jan 15, 2005, at 4:05 PM, Richard Brewster
> wrote:
> >>
> >> Many of us use the Wiard/Blacet Miniwave as a
> quantizer. It so
> >> happens
> >> I was just using it today.
> >>
> >> http://www.blacet.com/MW.html
> >>
> >> It comes with a quantizer bank in the PROM
> and there is another
> >> quantizer PROM available. Check the links on
> the page above. Larry
> >> Hendry has a Stooge panel (several different
> ones, actually)
> >> available
> >> in MOTM format for the Miniwave, and you can
> also use Front Panel
> >> Express to make a panel for it. Dave
> Hylander has a great
> >> expander for
> >> the Minwave that holds 10 EPROMs.
> >>
> >> http://www.hylander.com/miniwave.html
> >>
> >> http://www.wiseguysynth.com/larry/panel.htm
> >>
> >> -Richard Brewster
> >>
> >> Jeremy wrote:
> >>
> >>> Hi all,
> >>>
> >>> Just wondering if there's an analog voltage
> quantizer out there in
> >>> MOTM format? Or something similar? I've been
> using a Serge
> >>> quantizer but the whole banana + 1/4" jack thing
> gets annoying.
> >>> Cheers for any help.
> >>>
> >>> - Jeremy
> >>>
> >>
Excuse my ignorance, why couldnt you take the banana
jacks out and put in their place the 1/4 inch motm
jacks that paul uses? I dont understand the banana
plug ... is there a ground and a hot wire with them?
If there is then the 1/4 inch jack should work... am
I missing something?
John in Miami
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250