Message I contacted the analogic-acs folks a few weeks ago when this popped up on AH since there are no quantizers available in an assembled form for 1/4" modulars at the moment (cough) - a situation that I hope will change this year. Unfortunately, they are not able to take any orders at this time - they said perhaps by March. Also, they were unwilling to change the banana jacks for 1/4" jacks. There are certainly spacing issues but I couldn't get them to provide any electrical reason.
Eric
Anyone on the list have one of these and can give us impressions? I
seem to remember some discussion about it a while back.
-Richard Brewster
Tobias Machine Head wrote:
>Here's a quantizer in MOTM format. Although it has white a metalic/white
>panel. It's also a 1/4 inch banana combo.
>
>http://www.analogic-acs.com/quantizer.html
>
>Cheers!
>Tobias Enhus
>
>
>
>
>
>>For quantizing applications the wavetable output is used as a control
>>voltage. In this mode the Miniwave is set to the 0-10V scale, which
>>takes positive input voltages and puts out positive voltages. A
>>quantizer PROM has a table that translates the incoming voltage to the
>>nearest quantized value, assuming a 1V/octave control voltage. The
>>standard Blacet PROM has 16 quantized scales, and the Quantizer PROM
>>offers 256. http://stretta.com/~matthew/resources/waveproms/index.html
>>(Too bad these are not currently available.)
>>
>>-Richard Brewster
>>
>>
>>Jeff Laity wrote:
>>
>>
>>
>>>When you do this, are you using the PCM sample wave playback as an
>>>audio source or as a control voltage?
>>>
>>>On Jan 15, 2005, at 4:05 PM, Richard Brewster wrote:
>>>
>>> Many of us use the Wiard/Blacet Miniwave as a quantizer. It so
>>> happens
>>> I was just using it today.
>>>
>>> http://www.blacet.com/MW.html
>>>
>>> It comes with a quantizer bank in the PROM and there is another
>>> quantizer PROM available. Check the links on the page above. Larry
>>> Hendry has a Stooge panel (several different ones, actually)
>>> available
>>> in MOTM format for the Miniwave, and you can also use Front Panel
>>> Express to make a panel for it. Dave Hylander has a great
>>> expander for
>>> the Minwave that holds 10 EPROMs.
>>>
>>> http://www.hylander.com/miniwave.html
>>>
>>> http://www.wiseguysynth.com/larry/panel.htm
>>>
>>> -Richard Brewster
>>>
>>> Jeremy wrote:
>>>
>>>
>>>
>>>>Hi all,
>>>>
>>>>Just wondering if there's an analog voltage quantizer out there in
>>>>MOTM format? Or something similar? I've been using a Serge
>>>>quantizer but the whole banana + 1/4" jack thing gets annoying.
>>>>Cheers for any help.
>>>>
>>>>- Jeremy
>>>>
>>>>
>>>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>