Thanks for the tip. I'll see if the standard MOTM knob fits on an
Octave CAT and lines up properly.. that would be nice. These
particular knobs are the same style wise, but don't have a set
screw. Instead they have a little metal insert inside them that
keeps it to a d-shaft. Some of these pieces are corroded and the
knobs don't really stay on well, not too mention they are all
scratched up.. thats why I'm looking for replacements.
-Jim
--- In motm@yahoogroups.com, Scott Juskiw <scott@t...> wrote:
> At 12:38 AM +0000 2005/01/09, Jim Carlile wrote:
> >Does anyone know if MOTM style knobs are available for d-shaft type
> >pots?
>
> I've put MOTM style knobs onto D-type pot shafts. I didn't get any
> kind of special knob for D-shafts, I used the standard knob. The
set
> screw just goes onto the flat part of the shaft. More significant
is
> whether or not the pot is attached to a PCB or is mounted to the
> front panel. Best if it's mounted to the front panel, otherwise you
> can have a knob whose minimum position is 4 o'clock and whose
maximum
> position is 2 o'clock.