100K pots should work fine. If the WET/DRY mix pot (R6) is 100K, the
output level will be slightly higher. I would try it and see. Making
R28 smaller would compensate. My regen pot (R2) does not have a detent
and it isn't a problem. I was planning to use 100K pots in my Time
Machines, but because they were out of stock I bought 50K
Vishay/Spectrol 149-71503.
-Richard Brewster
Don Ojeman wrote:
>This week I have time to assemble my Blacet Time
>Machine and Dark Star to MOTM format.
>
>I have a question on what linear pots to use I have
>look over the parts list on Dave's hotrodmotm site,
>Bourns #91A1A-B24-B18 50k CP Pot @20% , I would like
>to use Vishays Spectrols #149-09-10-104, 100k cermet
>@10%.. the Spectrol 50k pot are only 1/8" shaft the
>alco knobs are MOTM Standard 1/4" as you know.
>I like low tolorance and ppm, If I use 100k pots will
>there be a big change on the delay effects and other
>unmatched effects?, Do I need the Detent on one of the
>pots?
>The question is 50k vs 100k pots in the TM circuit
>what should I do I will be ordering the pots, thanks
>Larry the panels and brackets are great.
>
>DonSynth...
>
>
>
>
>