On Saturday 11 December 2004 17:49, J. Larry Hendry wrote:
> > - MIDI CV out -> Larry's 822.
>
> Robert, This will work fine. Use the TOP switch contact
> on the "A IN" on the 822. The "B" in is already
> normalled from the A if not jacked if you built it to my
> instructions. So, only one connection from the MIDI CV
> is needed. Your only problem will be if you want to use
> 2 outputs from the MIDI CV to the 822. You will need to
> remove the "normalled" connection from A down to the "B
> IN" TOP switch contact.
Ah I see. Good thinking. Indeed, the '650 is on order. Four
outputs then, which nicely match with the 4 inputs of the
two '822s I have here. :)
>
> > - '822 -> 1V/Oct of '300.
>
> I see no problem with that. The 300 has a jumper from
> the TOP to BEVEL on the 1/v octave jack. You will need
> to remove that before you connect your 822 output to the
> TOP.
Got it.
> > Did you use some kind of connector in the cable to
> > easily disconnect the modules so that they can be
> > removed from the cabinet?
>
> That's a good idea IMO. Any decent connector should do.
> I'd opt for something light and non conductive on the
> outside. I'd probably use molex.
Okay. Thanks!
Robert