Archive of the former Yahoo!Groups mailing list: MOTM

Hey All -

OK, 510 came today and it's built and in the rig! Pretty easy build
if you have a few under your belt. The wiring is the hardest (most
tedious) part. Watch out for R13 and R29: I switched 'em, the
labels are funny. Also, the manual says the 68K resitors (7 of
them) are green, gray, black: that should be BLUE, gray, black. My
switch pot is a little scratchy, too. I'll see if that works itself
out; if not, I'll ping Paul.

Try this if you have one: SIN into Y IN, then mess around with each
of the X, Y, and Z WARP knobs. Try it with the POWER knob at each
of the three positions. I find I can get timbres anywhere from an
Oakley Wave Folder to a CGS Wave Folder and a whole bunch of other
stuff in between. Try putting an LFO into the Z OFFSET jack. Big
timbre from a single sine wave!

Now add SAW to X and PULSE to Z from the same oscillator as the sine
wave. Or a different one. Somebody please get me away from my rig!

Mike