Hi Folks,
RE: The Four-pot board used on the Control-X modules.
> Now he is using two (at least that is the way the new OMS-902 is.
This is correct. I use two op-amps per reversible attenuator circuit,
and with an optional trimmer to set zero position too.
> Looks like one resistor would need to be tacked in for the 3rd input
to that summing amp. That is a pretty easy mod.
No need to mod. This resistor, and input solder pad, are already there
because I use it on the 2U version of the VC-ADSR module. Each output
stage of the four-pot circuit board is summing stage to allow an
additional external CV to be added to the main signal path.
Regards,
Tony Allgood www.oakleysound.co.uk
Oakley Modular Synthesisers Penrith, Cumbria, England