Yes, I can certainly understand that! For DIYers who would like to add
this feature to any module, check out the PC board Ken Stone made for
this purpose at my request. Go to
http://www.cgs.synth.net/ and look
for the CGS56 PC board, Gate Converter. It has 4 converters built
around a TL074 chip. The board is 1.15 x 2 inches in size. Four of
these boards would be needed for Paul's VC Divider (assuming 16
outputs). The CGS56 could be put to other uses, as well.
-Richard Brewster
Paul Schreiber wrote:
>>If the output square waves go +/-5V instead of 0 to +5V, then they can
>>be inverted by any analog inverter. I find this useful to produce both
>>phases for control purposes. If you invert 0 to +5V you get 0 to -5V,
>>which can't be used as a gate or trigger.
>>
>>
>
>Errr...not going to put 16 level shifters on there! Over 180 parts just for
>that!
>
>Paul S.
>finishing up pc board for the breadboard ∗today∗
>
>
>
>