>
> I have four cables into my mixing board dedicated to my modular.
> Sometimes these will patch into the output of a VCA, sometimes
> they'll be patched to the output of a filter, or to the output of a
> frequency shifter. Sometimes I'll have to run a few extra cables from
> the modular to the mixer if the patch has more than four distinct
> sounds that I want to record on separate tracks.
>
> Some time ago, there was talk from texas about an output module, but
> that seems a bit superfluous if you have a mixing board.
An output module would still be a nice option. I typically don't track
through my board, but rather through a preamp/limiter/A->D pathway.
A module similar to the 940 Patch Panel with 1/4 inputs tied to
DC filtered/buffered instrument and line level outs would rock.
Paul mentioned to me that he had something on the back burner similar to
Blacet's Input Processor as well. Having both on hand would seem to make
cross-patching with other instruments and recording a breeze.
(I'm sure the DIY contingent makes these things for themselves already,
but for the rest of us...)
----------------------- Tear Along Dotted Line -----------------------
John Neilson
jneil@... this message brought to you by 'e-mail' -- safe, clean, Modern!