Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: Re: OT - Updated - MOTM/Oakley/blacet system

From: "Mike Marsh" <michaelmarsh@...>
Date: 2004-07-24

I purchased a kit from Dave and the transaction was exceptional. The
module is now built and in my cabinet. If you've heard any of the
GX-1 demos, they all have the nnew uMixer in the patch!

Thanks, Dave, hope your situation resolves pronto.

Mike

--- In motm@yahoogroups.com, Dave Oleksy <faldska@y...> wrote:
> Well the first round went pretty well. The #1
> requested item was the Tellun TLN-156 Neural Agonizer.
> Eight people asked for it. Well this is what I have
> left:
>
> New Stuff:
>
> MOTM-19A - Rack Rails - $30 - I would prefer to sell
> these locally (Bay Area) but if you want to pay for
> shipping I'll sell them.
>
> Stooge Patch Cables - I have about $200 - $300 worth
> of Stooge Patch Cables, in various lengths. E-mail me
> if interested and I'll list them all.
>
> Assembled (by me, unless otherwise noted):
> MOTM-110 - Ring Mode / VCA ==> $200
> MOTM-120 - Sub-Octave Multiplexer ==> $170
> MOTM-300 - Ultra VCO ==> $300
> MOTM-310 - micro VCO ==> $200
> MOTM-380 - Quad LFO ==> $115
> MOTM-420 - Voltage Controlled Filter (x2)
> 1 assembled by me ==> $200
> 1 bought used and I believe it had
> originally been purchased
> assembled - a couple of small scratches on
> front panel ==> $190
> MOTM-440 - Discrete OTA Lowpass Filter ==> $240
> MOTM-490 - micro VCF ==> $150
> MOTM-700 - Dual VC Router ==> $150
>
> Kits:
> Blacet/Wiard Miniwave - MOTM Kit (no front panel,
> pots, knobs, or jacks)
> ==> $140
> - Stooge Front Panel + 4-pot
> long PCB mounting bracket
> ==> $30
> =========> All for $160
>
> PCBs:
>
> Oakley PCBS -
> - Little LFO PCB (Issue 4) + Omeg pot
> kit x3 ==> $20 ea, $55 for all 3
> - EFG (Issue 2) + Little Lag (Issue 1) +
> Omeg pot kit (for both) ==> $60
> - State Variable Filter (Issue 1) + Omeg
> pot kit ==> $45
> ===> $150 for all Oakley PCBs + pot kits
>
> RJWSoft - Sound Lab Mini-Synth - Has two VCOs, one
> LFO, one Mixer, one State Variable Low-Pass/Band-Pass
> Filter, one AR Envelope Generator with repeat, and
> one VCA and runs off two 9 Volt batteries. (PCB
> ONLY) ==> $20
>
>
> Make me an offer for all of it.
>
> Again, thanks for helping me out.
>
> dave
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - 50x more storage than other providers!
> http://promotions.yahoo.com/new_mail