First of all, I am sorry for the cross-posting...
It is with a heavy heart that I must sell my
MOTM/Oakley/Blacet/etc. system.
But, I have been living outside my means for quite a
while now, and it has
finally caught up with me. So, I am forced to sell my
system. Hopefully,
I will be able to purchase another system in the
future.
So, without further ado, here is what I've got:
Assembled (by me, unless otherwise noted):
Encore Electronics - Encore UEG - Universal Event
Generator ==> $240
MOTM-101 - Noise / S&H ==> $170
MOTM-110 - Ring Mode / VCA ==> $200
MOTM-120 - Sub-Octave Multiplexer ==> $170
MOTM-300 - Ultra VCO ==> $300
MOTM-310 - micro VCO ==> $200
MOTM-320 - Voltage Controlled LFO ==> $150
MOTM-380 - Quad LFO ==> $115
MOTM-390 - micro LFO ==> $115
MOTM-410 - Triple Resonant Filter ==> $240
MOTM-420 - Voltage Controlled Filter (x2)
1 assembled by me ==> $200
1 bought used and I believe it had
originally been purchased
assembled - a couple of small scratches on
front panel ==> $190
MOTM-440 - Discrete OTA Lowpass Filter ==> $240
MOTM-490 - micro VCF ==> $150
MOTM-700 - Dual VC Router ==> $150
MOTM-800 - EG (x2) ==> $100 ea, $190 for both
MOTM-850 - Pedal Interface ==> $120
MOTM-900 - Power Supply ==> $100
Kits:
NOTE: All front panels need to be drilled.
Blacet/Wiard Miniwave - MOTM Kit (no front panel,
pots, knobs, or jacks) ==> $140
- Stooge Front Panel + 4-pot
long PCB mounting bracket ==> $30
- Socket Rocket waveform EPROM
==> $20
- Matthew Davidson waveform ROMS
==> $25 each, $110 for all 5
--
http://www.stretta.com/%7ematthew/resources/waveproms/index.html ---- Scale Quantizer
---- Morphine
---- Vector 1
---- Vowels
---- Bosch Gardens
=====================> All for
$290
Blacet Time Machine - MOTM kit (no front panel, pots,
knobs, or jacks) ==> $175
- Stooge Front Panel + PCB bracket
==> $30
- NOTE: This kit is partially
built. All components except
- wires and power supply posts
have been soldered.
=======================> $190 for
kit + front panel
Blacet Dark Star Chaos - MOTM kit (no front panel,
pots, knobs, or jacks) ==> $135
- Stooge Front Panel (no PCB
bracket) ==> $25
- NOTE: This kit is partially
built. All components except
- wires and power supply posts
have been soldered.
=======================> $150 for
kit + front panel
MOTM-190 - micro VCA (kit, NOT assembled) ==> $160
MOTM-890 - micro Mixer (kit, NOT assembled) ==> $100
Oakley OMS-410 - Companion module to MOTM-410 -
Complete kit (Todd's with Bournes pots)
- The PCB has been partially stuffed.
Looks like all
- resistors and caps.
============================> $150
PCBs:
LArry Hendry - JLH-822 - dual channel octave/semitone
voltage switch
- PCB x2 (matched resistors are already
soldered in) ==> $10 ea, $15 for both
- small-diameter, continuous rotation
switch x4 ==> $8 ea, $50 for all 4
- Front panel + PCB bracket x2 ==> $20
ea, $30 for both
=============> All for $90
Oakley PCBS -
- Little LFO PCB (Issue 4) + Omeg pot kit
x3 ==> $20 ea, $55 for all 3
- Sample & Hold and Slew Generator PCB
(Issue 1) + Omeg pot kit ==> $30
- Superladder PCB (Issue 3) + Omeg pot
kit ==> $50
- EFG (Issue 2) + Little Lag (Issue 1) +
Omeg pot kit (for both) ==> $60
- Equinoxe (Issue 1) + Omeg pot kit +
front panel ==> $45
- State Variable Filter (Issue 1) + Omeg
pot kit ==> $45
- Wavefolder (Issue 3) + Omeg pot kit ==>
$45
- OMS-820 - companion to MOTM-820 (Issue
1) + Omeg pot kit ==> $20
========> $325 for all Oakley PCBs + pot
kits + Equinoxe Front panel
RJWSoft - Sound Lab Mini-Synth - Has two VCOs, one
LFO, one Mixer, one State
Variable Low-Pass/Band-Pass
Filter, one AR Envelope
Generator with repeat, and one
VCA and runs off two
9 Volt batteries. (PCB ONLY)
==> $20
The Tellun Corp. - TLN-156 - Neural Agonizer voltage
controlled spring reverb
processor. I currently
have a Stooge Panel
on order for the TLN-156.
I will have Larry
ship it too you (I hope)
when they are complete.
==> $25 for PCB, $35 for
front panel, $55 for both
Front Panels:
Yes, I have front panels for PCBs I don't even own, go
figure.
CatGirl Synth - Burst Generator ==> $25
CatGirl Synth - Dual ASR ==> $25
SMOKING DEAL:
======> $4700 for everything.
First come, first serve, unless someone offers to take
it all.
I will accept Money orders, checks, Paypal (which I
prefer). YOU PAY SHIPPING!!
If you are local (SF Bay Area) I will also accept cash
and will deliver for FREE.
Thanks for your time,
Dave Oleksy
please send all e-mail to
faldska@...NOTE: I will be out of town this weekend so I probably
won't be able to respond until Monday.
__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/