Although there are many ways to fill those last two slots, and I have seen a
lot of good suggestions, Richards comment below makes a lot of sense in
terms of not wasting a spot with a mult. The MOTM-320 has a lot of blank
panel space. In fact, it has enough blank panel space to support three of
four 4x mults. Just buy a dozen jacks or so and get your drill out.
You may be able to find several 320 front panels available out there if you
want to keep the original for some reason. Several people have modified
their 320s to include complementary outputs, which does include panel
replacement.
Larry H
---- Original Message -----
From: Richard Brewster <
pugix@...>
If 'twere my choice, I would fill out this rack with a 390 and a 490 and
figure out other ways to multiple up the patch cords.
-----
>>I already have the following:
>>
>>MOTM-101 Noise/S&H
>>MOTM-110 Ring Modulator/VCA
>>MOTM-120 Sub-Octave Multiplexer
>>MOTM-300 VCO (X2)
>>MOTM-320 LFO
>>MOTM-420 VCF
>>MOTM-440 VC Lowpass Filter
>>MOTM-800 Envelope Generator (X2)