With all this conversation on SpeakJet I thought I would share my
experience. I have one running interfaced to my PSIM. I don't have
the PC software installed yet and will do that this week so my
programming is somewhat limited. It currently just says "welcome".
I wrote a quick program to sample noise with my S&H and I use this
output to select and send a random allophone to the SpeakJet.
While messing around, it dawned on me that I could use the SpeakJet
output as the microphone input to my vocoder - it's a Roland SVC-350.
It came out pretty good!
Here's a link to an mp3 if you want to hear it. The first four
seconds are just the SpeakJet output. Then it goes into vocoder
mode. It's short but shows the possibilities. Enjoy!
Dave
http://home.earthlink.net/~dabr/synths/samples/speakjet2vocoder.mp3