For those wondering about how to do the conversion of their Wiard Noise Ring
to MOTM format, your worries are over. There is no need to buy an assembled
Noise Ring, tear it apart, void your warranty, and rebuild it into MOTM
format. Instead, you can simply send all the parts you would have purchased
anyway to Grant. He will build and test the Noise Ring in MOTM format
behind your Stooge panel.
We can do this individually or as a group. In either case, I think we
should deliver your Noise Ring panel directly to Grant. This means Stooge
drilling for all those panels we deliver directly to Grant. Let me know how
you feel about doing this as a group or each person individually. I don't
care.
Clearly, this is a better deal that doing the conversion yourself since the
cost to you is the same. See the letter below from Grant suggesting this
is the best way to handle the conversions.
Larry Hendry
----- Original Message -----
From: Grant Richter <grichter@...>
I actually thought of a plan that might work for everybody. If the customer
sends me a "kit" of the following:
1. Completely drilled and ready to assemble MOTM compatible faceplate
2. Six 100K linear potentiometers with mounting hardware
3. Six knobs
4. Eight jacks with mounting hardware
5. A check for $199.00 US dollars
Then I will assemble, test, warranty and ship the module like any other
Noise Ring.
That way I can be sure they are assembled and tested correctly.
Best Regards,
Grant Richter
Wiard Synthesizer