First, my compliments to Scott Jiskiw's web pages. Very nice! I have
done most of those mods, too. Except I don't have any blue LEDs (yet).
Now, as to taking things apart. I am more than halfway through
retrofitting the first of my two Blacet Miniwaves for the 10-EPROM
Hylander expander board.
http://www.hylander.com/miniwave.htmlI went with the 10-position thumbwheel, because my Miniwaves are housed
in custom $chaeffer panels. To save the panels I am just replacing the
A/B EPROM toggle switch. I have become very intimate with my Dremel
tool (and a lot of cardboard and masking tape). I removed all parts
from the panel to cut hole for the switch, including the eight LEDs,
which I replaced with nice green T1 Lumex panel mount units, Mouser
696-SSI-LXR1612GD, (not available in blue, Scott). You can find my
Schaeffer panel design in the ModularSynthPanels group files, if you're
interested.
I am one of those oddballs who loves to build a synth almost as much as
playing with it. I can hardly wait even to take my own things apart --
again!
-Richard Brewster
Tony Karavidas wrote:
>Some people just can't wait to take things apart!!
>
>Looks nice Scott!
>
>
>Tony
>
>
>
>
>>-----Original Message-----
>>From: Scott Juskiw [mailto:scott@...]
>>Sent: Saturday, February 28, 2004 4:02 PM
>>To: motm@yahoogroups.com
>>Subject: [motm] A few more mods
>>
>>I've updated my "mods" page to include some recent changes.
>>Most of these are simple LED modifications or daughterboard add ons.
>>
>>http://www.tellun.com/motm/mods/motm101/motm101.html
>>
>>http://www.tellun.com/motm/mods/motm120/motm120.html
>>
>>http://www.tellun.com/motm/mods/motm320/motm320.html
>>
>>http://www.tellun.com/motm/mods/motm800/motm800.html
>>
>>Also, check out the Frequency Shifter Special Edition:
>>
>>http://www.tellun.com/motm/mods/fs/fs.html
>>
>>
>>
>>
>>
>
>