Tony,
I like FreqShift_ProductionNumbersAllBip.jpg as the best choice. I might
go with an even smaller font on the smaller knobs though.
Scott
----------------------------------------------------
Tony Karavidas wrote:
> Ok here's the one with "+" on the fine shift. I made the "+" a smaller font
> size and that tightened it up a bit.
>
> http://www.encoreelectronics.com/FS/FreqShift_ProductionNumbersAllBip.jpg
>
> Now I'm not sure which one I like the best.
>
> Let me know...
> Tony
>
>
> -----Original Message-----
> From: Tony Karavidas [mailto:tony@...]
> Sent: Monday, December 08, 2003 4:47 PM
> To: 'groovyshaman@...'; 'motm@yahoogroups.com'
> Subject: RE: [motm] Frequency Shifter - one 'final' question
>
> Ok, here's another option. There are numbers on all pots, but any number
> that would have been partially obscured has been removed.
>
> http://www.encoreelectronics.com/FS/FreqShift_ProductionNumbersAll.jpg
>
> What do you think of this? If you like this one the best so far, do you like
> the different numbers removed depending on where they are, or would you like
> the same numbers removed on all of the small pots?
>
> Also, I had the fine shift pot with +1, +2, etc, and I really didn't like
> it. (Although it looks OK on the big knob). If you really want to see it, I
> can post that too.
>
> Tony
>
>
> -----Original Message-----
> From: groovyshaman@... [mailto:groovyshaman@...]
> Sent: Monday, December 08, 2003 4:39 PM
> To: tony@...; motm@yahoogroups.com
> Subject: Re: [motm] Frequency Shifter - one 'final' question
>
> [Although meaningless] the numbers look nice.
> Maybe just a + and - on the Fine Shift control.
>
> George
> ----- Original Message -----
> From: "Tony Karavidas" <tony@...>
> To: "'Mark'" <yahoogroups@...>; <motm@yahoogroups.com>
> Sent: Monday, December 08, 2003 7:17 PM
> Subject: RE: [motm] Frequency Shifter - one 'final' question
>
>
>
>>0 to 10 wouldn't make sense because it doesn't communicate the ability
>
> of
>
>>the shifter to 'invert' or shift through zero. I've updated the info
>>on
>
> the
>
>>site recently to indicate it's a through zero FS.
>>
>>Yes, the Fine Shift approaches zero towards the center of its rotation.
>
> I'll
>
>>look into text for that knob too.
>>
>>The CV is positive only.
>>
>>Tony
>>
>
> <snip>
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>