Good grief, here we go with a bazillion opinions.
IMHO, leave the + signs off all the numbers, even for the Initial
Shift (I think we can figure out that "8" means positive 8). Add
numbers to the Fine Shift knob. For the other 6 knobs, either leave
the numbers off entirely, or only use numbers that can be replicated
the same on all six knobs (looks like this would only be numbers
0,3,7,10).
Thanks for asking for our input Tony.
At 4:51 PM -0800 2003/12/08, Tony Karavidas wrote:
>Ok here's the one with "+" on the fine shift. I made the "+" a smaller font
>size and that tightened it up a bit.
>
>http://www.encoreelectronics.com/FS/FreqShift_ProductionNumbersAllBip.jpg
>
>Now I'm not sure which one I like the best.
>
>Let me know...
>Tony
>