It's already done! (I was doing that anyway and they your email popped up!)
Thanks,
Tony
> -----Original Message-----
> From: Scott Juskiw [mailto:scott@...]
> Sent: Thursday, November 06, 2003 8:21 PM
> To: tony@...
> Cc: motm@yahoogroups.com
> Subject: [motm] Frequency Shifter power connector
>
> Hi Tony, one last thing I wanted to ask about the FS layout.
> On the UEG, the power connector is positioned in such a way
> that makes it impossible to mount a UEG along the right edge
> of a cabinet (if the cabinet has no air gap between the
> mounting rails and the right side of the cabinet). This is
> not a deal breaker, but if possible, it would be better if
> the power connector were not in the same place on the FS.
> However, if it were in the same place, but rotated 180
> degrees, it would still allow putting the module in any
> location in a cabinet.
>
> Thanks.
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the
> US & Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/VpLolB/TM
> --------------------------------------------------------------
> -------~->
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>