Archive of the former Yahoo!Groups mailing list: MOTM

Hi Tony, one last thing I wanted to ask about the FS layout. On the
UEG, the power connector is positioned in such a way that makes it
impossible to mount a UEG along the right edge of a cabinet (if the
cabinet has no air gap between the mounting rails and the right side
of the cabinet). This is not a deal breaker, but if possible, it
would be better if the power connector were not in the same place on
the FS. However, if it were in the same place, but rotated 180
degrees, it would still allow putting the module in any location in a
cabinet.

Thanks.