Off topic, but I couldn't resist. A neat circuit for debouncing a switch
using 1/6 of a CD4010 chip can be found in Electronotes #73, page 11. It
is a simple positive feedback loop using a single 1K resistor from the
output back to the input. The switch is SPDT between gound and Vcc. No
capacitor is needed. It acts as a latch. Any CMOS gate (two inverters for
example) would work. Something to keep in mind for your next DIY circuit :-).
-Richard Brewster
At 08:42 PM 11/5/03 -0700, Adam Schabtach wrote:
> >> Hey Tony, the PAGE button on my Expressionist bounces like
> >> crazy. Is there anything that can be done about it? Should I
> >> just try some contact cleaner on it for starters?
> >
> >
> > You could try that for now. I will lengthen the debounce time when I
> get the
> > next update out. I just did a quick review of the Expressionist source code
> > and it looks like the debounce time was set to 3mS. It should probably
> be 10
> > or 20.
>
>I will try contact cleaner, since earlier you said in response to another
>query about an Expressionist update "I'm not sure when, but yes it will get
>an update."
>
>--Adam
>
>