So pardon if some of these abservations fall under 'how dense is this
guy':
∗ So I can connect the final output(s) of a patch to this device and
get balanced (TRS or XLR) for each of the inputs, right? If I've set
up a patch, for example, that pans left and right, you would preserve
the 'stereo' out? If so, what about feeding the IO module 4 outputs
from a patch (I do this all the time with the 410)?
∗ Some level indicator is required, I think. At a minimum a clip LED
for each channel (I'm not sure if it's better on input or output).
∗ Will there be gain controls for the outputs?
∗ The Neutrik connectors have both XLR and TRS in one jack. You
could use these to save space on the panel (and add outputs!).
∗ Overkill: MOTM quality analog to digital stereo output (AES/EBU and
SPDIF) :) :) :)
Mike
--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@a...> wrote:
> I am designing (yes, it DOES occur from time to time!) a new I/O
module. This is what I'm
> thinking about:
>
> a) has 2ea MOTM level-to-balanced out (+4dbu into 2 XLRs and TRS
jack)
>
> b) High-end headphone amp with several sneaky tricks (not telling!).
>
> c) 2ea balanced in (XLR + 1 TRS) to MOTM level (+4dBu >>10V pk-pk)
>
> Any thoughts (no 100 segment VFD bar graphs...sorry!)
>
> Paul S.