Since you are already having MOTM to line level, how about putting some
line-level balanced screw connectors on the PC board. This way, it can
be wired into the rest of the studio patchbay (or a line-level connecter
on the back of the MOTM case)
Envelope follower and trigger on the ins?
Four outs instead of two?
Dave
> -----Original Message-----
> From: Markk W. Roberts [mailto:motmmarkk@...]
> Sent: Thursday, August 21, 2003 6:38 PM
> To: MOTM List
> Subject: [motm] design on balanced module
>
>
> I am designing (yes, it DOES occur from time to time!) a new
> I/O module. This is what I'm thinking about:
>
> a) has 2ea MOTM level-to-balanced out (+4dbu into 2 XLRs and TRS jack)
>
> b) High-end headphone amp with several sneaky tricks (not telling!).
>
> c) 2ea balanced in (XLR + 1 TRS) to MOTM level (+4dBu >>10V pk-pk)
>
> Any thoughts (no 100 segment VFD bar graphs...sorry!)
>
> Paul S.
>
> my only idea that I would suggest is that the Jacks used for
> the XLR and 1/4 be one in the same... Neutrik makes them,
> center is the 1/4 inch and the outer become an XLR, cause IMO
> you are going to use one or the other. save on space, and
> cost's. I love the idea... ∗including the sneaky tricks∗ grin
>
> Markk
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Buy Ink Cartridges or Refill Kits
> for Your HP, Epson, Canon or Lexmark Printer at Myinks.com.
> Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/VpLolB/TM---------------------------------------------------------------------~->
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/