I could not get my Oakley Wavefolder to do the full wave rectification
by itself. You would have to take the clamp and clip outputs and mix
them together, which indeed is another solution to the problem.
John Loffink
jloffink@... The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/ > And if you have Tony's WaveFolder, that'll do the trick, too...
>
> --- In motm@yahoogroups.com, "John Loffink" <jloffink@a...> wrote:
> > Yes, this will work to a limited extent. Up control should be at
> or
> > near zero and Down control should be about 5.
> >
> > Ideally you would precede this with a full wave rectifier. My DIY
> Diode
> > Waveform shaper module can do that, information located here:
> > http://www.wavemakers-synth.com/motm/dws.html . Nothing
> immediately
> > comes to mind for accomplishing this with just MOTM modules, but
> somehow
> > I feel an MOTM-800 Dual VC Router patch coming on. :-)