That should be MOTM-700 Dual VC Router.
John Loffink
jloffink@... The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/ > -----Original Message-----
> From: John Loffink [mailto:jloffink@...]
> Sent: Sunday, July 27, 2003 12:08 PM
> To: 'grotechef'; motm@yahoogroups.com
> Subject: RE: [motm] Re: Envelope Follower
>
> Yes, this will work to a limited extent. Up control should be at or
> near zero and Down control should be about 5.
>
> Ideally you would precede this with a full wave rectifier. My DIY
Diode
> Waveform shaper module can do that, information located here:
> http://www.wavemakers-synth.com/motm/dws.html . Nothing immediately
> comes to mind for accomplishing this with just MOTM modules, but
somehow
> I feel an MOTM-800 Dual VC Router patch coming on. :-)
>
> John Loffink
> jloffink@...
>
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com/
>
> The Wavemakers Modular and Integrated Synthesizer Web Site
> http://www.wavemakers-synth.com/
>
> > hello,
> >
> > isn't it possible to use the lag processor as an enveloppe follower
> > (with up-pot set to minimum and down-pot set to slew so it 'rides'
> > the enveloppe?)
> >
> > greetz,
> > chef!
> >
> >
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ >