True, since there is no inside paint you are probably OK. The ∗jacks∗ are OK at 0.375". Go
figure........
Paul S.
----- Original Message -----
From: "J. Larry Hendry" <jlarryh@...>
To: "Paul Schreiber" <synth1@...>; "MOTM List" <motm@yahoogroups.com>
Sent: Friday, July 25, 2003 11:03 PM
Subject: Re: [motm] Stooge panel drilling
> Yes, but we don't add paint to the holes after they are drilled. 0.375 has
> been working fine so far with everything but the Omeg pots. My caliper
> reads 0.372" on the outside of the threads on MOTM supplied Spectrol pots.
> That's 9.45 mm for you metric guys. :)
>
> Larry - Drilling Stooge 1 of 2.
>
> ----- Original Message -----
> From: Paul Schreiber <synth1@...>
> To: MOTM List <motm@yahoogroups.com>; J. Larry Hendry <jlarryh@...>
> Sent: Friday, July 25, 2003 11:02 PM
> Subject: Re: [motm] Stooge panel drilling
>
>
> FYI: 3/8 (.375") for pots is a ∗bad idea∗. I use 0.390" because the .375"
> dimension is for the
> ∗inside∗ of the threads!
>
>
> Paul S.
>
>
> ----- Original Message -----
> From: "J. Larry Hendry" <jlarryh@...>
> To: "MOTM List" <motm@yahoogroups.com>
> Sent: Friday, July 25, 2003 6:34 PM
> Subject: [motm] Stooge panel drilling
>
>
> > If you have Stooge panels on order and have ordered drilling services,
> > please read: Otherwise, delete another waste of bandwidth and forgive me.
> >
> > The standard hole for pots is 3/8". It was brought to my attention by
> Jeff
> > Pontius (thanks Jeff) that the Oakley Omeg pots require a slightly larger
> > hole. The default hole for ALL panel pots is 3/8" We have no way of
> > knowing what pots you are planning to use in your construction. So, if
> you
> > are planning to use the Omag pots from Tony and want the holes the next
> size
> > up so they fit without additional hole stretching, you need to let me know
> > ASAP. Otherwise, you will get 3/8 inch.
> >
> > Thanks
> > Larry
> >
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>