Yes, but we don't add paint to the holes after they are drilled. 0.375 has
been working fine so far with everything but the Omeg pots. My caliper
reads 0.372" on the outside of the threads on MOTM supplied Spectrol pots.
That's 9.45 mm for you metric guys. :)
Larry - Drilling Stooge 1 of 2.
----- Original Message -----
From: Paul Schreiber <synth1@...>
To: MOTM List <motm@yahoogroups.com>; J. Larry Hendry <jlarryh@...>
Sent: Friday, July 25, 2003 11:02 PM
Subject: Re: [motm] Stooge panel drilling
FYI: 3/8 (.375") for pots is a ∗bad idea∗. I use 0.390" because the .375"
dimension is for the
∗inside∗ of the threads!
Paul S.
----- Original Message -----
From: "J. Larry Hendry" <jlarryh@...>
To: "MOTM List" <motm@yahoogroups.com>
Sent: Friday, July 25, 2003 6:34 PM
Subject: [motm] Stooge panel drilling
> If you have Stooge panels on order and have ordered drilling services,
> please read: Otherwise, delete another waste of bandwidth and forgive me.
>
> The standard hole for pots is 3/8". It was brought to my attention by
Jeff
> Pontius (thanks Jeff) that the Oakley Omeg pots require a slightly larger
> hole. The default hole for ALL panel pots is 3/8" We have no way of
> knowing what pots you are planning to use in your construction. So, if
you
> are planning to use the Omag pots from Tony and want the holes the next
size
> up so they fit without additional hole stretching, you need to let me know
> ASAP. Otherwise, you will get 3/8 inch.
>
> Thanks
> Larry
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>