FYI: 3/8 (.375") for pots is a ∗bad idea∗. I use 0.390" because the .375" dimension is for the
∗inside∗ of the threads!
Paul S.
----- Original Message -----
From: "J. Larry Hendry" <jlarryh@...>
To: "MOTM List" <motm@yahoogroups.com>
Sent: Friday, July 25, 2003 6:34 PM
Subject: [motm] Stooge panel drilling
> If you have Stooge panels on order and have ordered drilling services,
> please read: Otherwise, delete another waste of bandwidth and forgive me.
>
> The standard hole for pots is 3/8". It was brought to my attention by Jeff
> Pontius (thanks Jeff) that the Oakley Omeg pots require a slightly larger
> hole. The default hole for ALL panel pots is 3/8" We have no way of
> knowing what pots you are planning to use in your construction. So, if you
> are planning to use the Omag pots from Tony and want the holes the next size
> up so they fit without additional hole stretching, you need to let me know
> ASAP. Otherwise, you will get 3/8 inch.
>
> Thanks
> Larry
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>