The '410s are in parallel. The 2 LFOs go into the SWEEP inputs (LFO#1 into '410 #1, etc).
Paul S.
----- Original Message -----
From: "tontaub" <egroups@...>
To: <motm@yahoogroups.com>
Sent: Thursday, June 19, 2003 9:14 AM
Subject: [motm] A Pair of 410s (was: Re: R. Rich's live techniques)
> Hi Paul,
>
> --- In motm@yahoogroups.com, "Paul Schreiber" <synth1@a...> wrote:
> > Another "noise" patch commonly used is taking 2 VCOs and
> > 'cross-modulating': the output of VCO #2
> > feeds the FM In of VCO #1 (VCO#2 usually set to SINE output).
> > The ouput feeds a pair of MOTM-410
> > Triple Resonant Filters, that are externally swept by 2 MOTM-320s
> > set roughly in quadrature.
>
> I'm afraid I didn't get the picture.
> Are the 410s in parallel and fed from the same source (VCO#1)?
> The LFOs go straight into each 410?
>
> Thanks, Michael.
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>